Gas Cutting Torch Oxy-Fuel Cutting Torches for Precise & Controlled Metal Cutting
Gas cutting torches designed for accurate cutting of mild steel plates using oxy-acetylene and oxy-LPG gas systems. Suitable for fabrication workshops, structural steel industries, shipyards and maintenance teams requiring clean cuts, stable flame control and reliable cutting performance in manual and mechanised gas cutting applications.
View Gas Cutting Torches →
Industrial Gas Cutting & Oxy-Fuel Equipment for Fabrication and Site Use
Complete range of oxy-acetylene and oxy-LPG gas cutting systems including torches, regulators, nozzles, hoses, safety devices, and material handling accessories.
Our industrial gas cutting equipment is engineered for fabrication workshops, structural steel industries, shipyards, EPC contractors, and maintenance teams, delivering safe gas control, stable flame performance, and long service life in continuous operating conditions.
Oxy-Acetylene Gas Cutting Torches
High-temperature gas cutting torches for precision and heavy-duty steel cutting using acetylene fuel.
Oxy-LPG / Propane Gas Cutting Torches
Injector-type torches designed for LPG and propane systems, offering safer and cost-effective cutting.
NM Type Gas Cutting Torches
ISO 5172 compliant NM cutting torches compatible with oxy-acetylene and oxy-LPG systems.
Gas Pressure Regulators
Single and double stage regulators for oxygen, acetylene, LPG, and propane gas control.
Gas Cutting Nozzles
Precision-machined cutting nozzles suitable for oxy-acetylene and oxy-LPG cutting applications.
Gas Hose Pipes
Reinforced twin and single gas hoses designed for safe oxygen and fuel gas transfer.
Flashback Arrestors
Essential safety devices preventing flashback and reverse gas flow in cutting systems.
Gas Cutting Trolley
Heavy-duty steel frame trolleys for safe cylinder handling and smooth site movement.
Gas Cutting Accessories
Complete range of spanners, nozzle cleaners, hose clips, connectors, and safety fittings.
Gas Cutting Torch for Industrial Metal Cutting Applications
Gas cutting torches are widely used for oxy-fuel metal cutting in fabrication workshops,
maintenance jobs, shipyards, and heavy industrial applications. A gas cutting torch delivers
a controlled oxygen and fuel gas flame to cut mild steel plates with accuracy, speed, and reliability.
Adonweld supplies industrial gas cutting torches and safety accessories suitable for continuous
cutting operations and demanding site conditions.
Gas Cutting Torch Types
Injector Type Gas Cutting Torch
Injector type gas cutting torches are designed for low-pressure fuel gases such as LPG and propane. Fuel gas is drawn by oxygen pressure, ensuring safe operation and stable flame characteristics.
- Low fuel gas pressure operation
- Reduced backfire risk
- Ideal for workshop & site use
Equal Pressure Gas Cutting Torch
Equal pressure gas cutting torches operate with oxygen and fuel gas supplied at the same pressure. They are commonly used with acetylene for faster cutting and clean edge finish.
- High cutting speed
- Equal oxygen & fuel gas pressure
- Best for controlled workshop use
NM Gas Cutting Torch (Nozzle Mix)
NM (Nozzle Mix) gas cutting torches mix oxygen and fuel gas inside the cutting nozzle, providing precise flame control and consistent cutting performance.
- Stable pre-heating flame
- Clean and accurate cutting
- Industrial fabrication suitable
Suitable for LPG / Acetylene / Propane
TIG Welding Accessories | Torches | Regulators | Consumables
Complete range of TIG welding accessories and consumables for fabrication workshops and industrial applications.
TRUSTED BY INDUSTRY BUYERS ACROSS INDIA
Gas Cutting Torch Systems & Safety Accessories
Adonweld supplies complete gas cutting torch systems including injector type, equal pressure, and nozzle mix torches along with certified safety accessories for fabrication workshops, EPC contractors, shipyards, and industrial maintenance teams.
Injector Type Gas Cutting Torch (Oxygen–LPG)
Designed for low-pressure LPG systems, injector type gas cutting torches use oxygen pressure to draw fuel gas, ensuring stable flame control and reduced backfire risk for site and workshop cutting.
Equal Pressure Gas Cutting Torch (Oxygen–Acetylene)
Equal pressure gas cutting torches operate with oxygen and acetylene supplied at the same pressure, delivering high cutting speed and clean edge finish for heavy steel fabrication.
NM Gas Cutting Torch (Nozzle Mix – All Fuel Gases)
Nozzle mix gas cutting torches mix oxygen and fuel gas inside the nozzle, making them suitable for Oxygen–LPG, Oxygen–Acetylene, and Oxygen–Propane applications with correct cutting nozzles.
Gas Cutting Trolley System
Heavy-duty gas cutting trolleys designed for safe handling of oxygen and fuel gas cylinders, ensuring stability, mobility, and organized gas cutting operations at site and workshop locations.
Flashback Arrestors & Gas Safety Devices
Flashback arrestors are critical safety accessories that prevent flame travel, backfire, and gas mixing, protecting operators, regulators, hoses, and gas cylinders during cutting operations.
Gas Regulators, Hoses & Cutting Nozzles
We supply oxygen, LPG, acetylene, and propane gas regulators along with red & blue gas hose pipes and application-specific gas cutting nozzles, ensuring safe pressure control and precise cutting performance.
Gas Cutting Nozzle Selection – ANM / ANME & PNM / PNME
Technical guide for correct selection of gas cutting nozzles based on fuel gas, flame characteristics, and ISO 5172 industrial safety requirements.
ANM / ANME – Acetylene Nozzle Mix
- Fuel gas: Oxygen + Acetylene
- High flame speed with concentrated pre-heat
- Fast piercing and narrow kerf
- Best suited for precision workshop cutting
PNM / PNME – Propane Nozzle Mix
- Fuel gas: Oxygen + LPG / Propane
- Wide and stable pre-heating flame
- Better heat distribution on thick plates
- Ideal for heavy fabrication and site work
Nozzle Selection Reference
| Fuel Gas | Nozzle Type | Mixing Principle | Typical Application |
|---|---|---|---|
| Acetylene | ANM / ANME | Nozzle Mix | Precision cutting, workshops |
| LPG / Propane | PNM / PNME | Nozzle Mix | Heavy fabrication, shipyards |
ANM vs PNM – Technical Comparison
| Parameter | ANM | PNM |
|---|---|---|
| Flame speed | High | Lower |
| Pre-heat flame | Sharp, concentrated | Wide, stable |
| Cutting speed | Faster | Moderate |
| Plate thickness range | Thin to medium | Thin to very thick |
| Typical use | Workshop precision | Heavy fabrication, site work |
Safety Note: ANM/ANME and PNM/PNME are the same nozzle types with different ISO/European markings. Nozzle selection must always be based on the fuel gas used — not the name on the nozzle. Always use compatible regulators, hoses, and flashback arrestors and follow manufacturer pressure charts for safe gas cutting operations.
TIG Welding Machines – TIG 200, TIG 300 & TIG 400 models designed for precision welding in fabrication, pharma, and industrial applications.
FREQUENTLY ASKED QUESTION
Questions Mostly Asked By Our Customer
Q1. Which applications are suitable for TIG welding machines?
TIG welding machines are ideal for precision welding of stainless steel, mild steel, aluminium, and alloy metals in fabrication shops, pharmaceutical plants, and industrial maintenance work.
Q2. What is the difference between TIG 200, TIG 250, and TIG 400 welding machines?
TIG 200 is suitable for light fabrication and thin materials, TIG 250 handles medium-duty industrial work, while TIG 400 is designed for heavy-duty welding and continuous industrial operations.
Q3. Where are TIG welding machines commonly used?
TIG welding machines are widely used in pharmaceutical, food processing, chemical, fabrication, piping, and precision manufacturing industries.
Q4. Can TIG welding machines run continuously for industrial use?
Yes, industrial-grade TIG welding machines are designed for stable arc performance and can operate continuously depending on duty cycle and model capacity.
Q5. What materials can be welded using TIG welding machines?
TIG welding machines can weld stainless steel, mild steel, aluminium, copper, and alloy metals with high precision and clean weld finish.
Q6. Are TIG welding machines available in single-phase and three-phase options?
Yes, TIG welding machines are available in both single-phase and three-phase configurations to suit workshop and industrial power requirements.
Q7. What accessories are required for TIG welding?
Essential TIG welding accessories include TIG torches, torch spares, argon regulators, welding cables, filler rods, and safety equipment.
Q8. How do I choose the right TIG welding machine for my application?
Choosing the right TIG welding machine depends on material thickness, duty cycle, power supply, and application type. Our team can help select the suitable model based on your welding needs.
GET IN TOUCH
Trusted By Leading Industries
We don’t just supply machines — we support your projects.
Talk to our team for guidance, quick quotes and reliable service you can count on.